Flue-gas desulfurization may be a set of technologies wont to remove sulphur dioxide from exhaust flue gases of fossil-fuel power plants, and from the emissions of other sulphur oxide emitting processes like waste incineration, Flue-gas desulfurization (FGD) may be a set of technologies wont to remove sulphur dioxide (SO2) from exhaust flue gases of fossil- fuel power plants, and from the emissions of other sulfur oxide emitting processes. ... Wet scrubbing employing a slurry of alkaline sorbent, usually limestone or lime, or seawater to wash gases. The FGD technology is predicated on a reaction that happens when the nice and cozy exhaust gases from the coal-fired boiler inherit contact with limestone. This reaction removes 92% of the sulfur dioxide from the flue gas and converts the limestone into Calcium Sulphite.Flue-gas desulfurization (FGD) may be a set of technologies wont to remove sulphur dioxide (SO2) from exhaust flue gases of fossil- fuel power plants, and from the emissions of other sulfur oxide emitting processes. 8. it's an impact device that absorbs and react using the alkaline reagent to supply a solid compound Caring for Your Chimneys & Flues When gas and oil burned for warmth , the damaging fumes produced range from soot (particulate matter), to dioxide (also toxic), to acidic water vapors formed when moisture condenses. None of those pollutants should be allowed to leak from the chimney into your lebensraum .SNOX Flue gas desulfurization removes sulphur dioxide , nitrogen oxides and particulates from flue gases; Dry sorbent injection systems that introduce powdered calcium hydroxide (or other sorbent material) into exhaust ducts to eliminate SO2 and SO3 from process emissions. Several wet flue gas desulfurization (FGD) processes are supported the absorption of sulphur dioxide in caustic suspension or absorption liquor.